why my electric gel ball blaster is making sounds

Electric gel ball blasters are considered popular. However, sometimes these blasters can produce unexpected sounds during gameplay. But Understanding why my electric gel ball blaster is making sounds is essential to identify and resolve any issues that may arise.

Electric gel ball blasters comprise several moving parts that propel the gel balls. Because these parts move and combine in complicated ways, they can make noise when they work. These sounds can be normal or a sign of malfunction.

Let’s explore the reasons behind these sounds, how they can be addressed, and provide expert advice to ensure an optimal gel ball blaster experience.

Identifying Unusual Sounds In Electric Gel Blaster

why my electric gel ball blaster is making sounds electric gel ball blaster

When identifying unusual sounds in your electric gel blaster, it’s important to approach the issue cautiously and follow a systematic process. 

Prioritize Safety

Before troubleshooting, ensure the blaster is completely unloaded, and the battery is disconnected. This will prevent any accidental discharge or harm during the inspection.

Inspect The External Components

Take a close look at the external parts of the blaster. Check the barrel, magazine, and stock for visible damage, wear, or detachment signs. Look for loose screws or other components causing the unusual sounds.

Focus On The Gearbox

The gearbox is a vital component in electric gel blasters and is often a source of unusual sounds. Follow the manufacturer’s instructions to disassemble the gearbox and gain access to its internal parts. 


Examine each component carefully, paying particular attention to gears, springs, and pistons. Look for any signs of breakage, wear, or misalignment.

Lubrication matters

Inadequate lubrication can lead to grinding or squeaking noises in the blaster. Apply an appropriate gel blaster lubricant to the gearbox and other moving parts, adhering to the manufacturer’s guidelines. 

Be cautious not to over-lubricate, as excessive lubrication can attract dirt and debris, causing additional problems.

Also See: What Are The Maintenance Tips For P90 Gel Blaster!

Check The Motor

Unusual sounds from the motor could indicate damage or misalignment. Check the motor for any visible signs of damage and ensure it is securely fastened in place. If the motor appears to be the problem, consider replacing it with a new one.

Assess Battery And Wiring Connections

Loose or damaged connections between the battery and wiring can cause intermittent power delivery and unusual sounds. Carefully examine the connections, tighten any loose components, and replace any damaged wiring that you may find.

Examine The Hop-Up Unit

The hop-up unit provides a backspin to the gel balls as they are fired. If you hear unusual sounds during firing, the hop-up unit may be misaligned or have debris inside. Clean the unit thoroughly and ensure it is correctly aligned with the barrel.

Seek Professional Assistance

If you cannot identify the source of the unusual sounds or feel uncomfortable disassembling the blaster, it is advisable to seek help from a professional gel blaster technician. 

They possess the expertise to accurately diagnose and repair the issue, ensuring the blaster’s optimal performance and safety.

Causes of Unusual Sounds in electric gel ball blaster

There can be several causes for unusual sounds in an electric gel ball blaster. Here are some potential factors to consider.

Gearbox Issues

The gearbox is a critical component of an electric gel ball blaster that transfers power from the motor to propel the gel balls. Unusual sounds like grinding, clicking, or whirring may indicate problems within the gearbox. 

Misaligned gears, worn-out teeth, or broken components could cause these sounds. The interaction between the gears may not be smooth, resulting in unusual noises.

Motor Problems

The motor provides the necessary power to drive the gearbox and propel the gel balls. If the motor is damaged, worn out, or misaligned, it may produce unusual sounds such as buzzing or screeching. 

Motor issues can arise from excessive use, overheating, or electrical problems. Faulty bearings within the motor can also lead to unusual noises.

Hop-up unit misalignment

The hop-up unit imparts backspin to the gel balls, enhancing their accuracy and range. If the hop-up unit is misaligned or improperly adjusted, it can cause a rattling or vibrating sound when firing. 

This misalignment can affect the trajectory of the gel balls, resulting in unusual noises.

Magazine Or Feeding Mechanism Issues

The magazine and feeding mechanism deliver gel balls to the firing chamber. If the magazine isn’t properly inserted or the feeding mechanism is faulty, it can lead to jamming, misfeeds, or clicking sounds. 

These issues may occur when the gel balls fail to feed smoothly into the firing chamber, causing interruptions and unusual sounds.

Loose Or Damaged Components

Over time, the vibrations and recoil from firing the blaster can cause screws, bolts, or other parts to become loose. These loose components can create rattling or vibrating sounds during operation. 

Regularly inspecting and tightening all relevant screws and connections can help mitigate this issue. Additionally, damaged or worn-out components within the blaster can contribute to unusual sounds and may require replacement or repair.

Barrel Obstructions

Blockages or debris within the barrel can disrupt the airflow and create unusual sounds when firing. These obstructions can interfere with the smooth passage of gel balls, causing sounds like scraping or clicking. 

Regularly cleaning the barrel and ensuring it is debris-free can help prevent this issue.

Must See: Why Does My Gel Blaster Keep Jamming?

Battery Issues

Insufficiently charged or faulty batteries can affect the blaster’s performance, leading to unusual sounds. An inadequate power supply to the motor may result in irregular or inconsistent operation, producing abnormal noises. 

Ensuring the battery is fully charged and in good condition is important for properly functioning the blaster.

Internal Damage Or Wear

Prolonged use or rough handling can cause internal damage to various blaster components. Cracks, dents, or broken parts within the blaster can lead to unusual sounds during operation. 

Thoroughly inspecting the blaster for any visible signs of damage and addressing them promptly can help maintain its optimal performance.

Troubleshooting and Solutions 

If your electric gel ball blaster is making unusual sounds, here are some troubleshooting steps and solutions to help you resolve the issues.

Cleaning With Maintenance

Cleaning and regular maintenance are essential to keep your blaster in top shape. Disassemble the blaster, clean all the components, and remove any debris or dirt affecting its performance. Pay attention to the gears, springs, and the barrel where the gel balls travel.


Proper lubrication of the internal mechanisms is crucial for smooth operation. Use a high-quality lubricant specifically designed for gel ball blasters. As the manufacturer recommends, apply the lubricant to the gears, springs, and other moving parts.

Battery Check

Inspect the battery for any signs of damage or wear. Ensure that it is fully charged and securely connected to the blaster. If the battery is old or faulty, consider replacing it with a new one to eliminate any power-related issues.

Gear Adjustment

If you suspect misalignment or damage to the gears, you may need to adjust or replace them. Refer to the blaster’s manual or seek professional assistance to ensure proper gear installation and alignment.

Recommended: How To Master AK Gel Blaster Shooting Techniques!

Seeking Professional Assistance

If the issue persists or you need clarification on performing repairs yourself, it is advisable to seek professional assistance. Experienced technicians can diagnose and resolve complex issues with your gel ball blaster, ensuring optimal performance and longevity.

Enhancing Performance and Reducing Noise In Electric Gel Ball Blaster

You can take several steps to enhance the performance and reduce noise in an electric gel ball blaster.

Upgrade Internal Components

Upgrading certain internal components can improve the blaster’s performance and reduce noise. Consider replacing stock gears, piston heads, cylinders, and motors with higher-quality aftermarket options designed for enhanced performance. 

These upgrades can result in smoother operation and reduced noise levels.

Use High-Quality Gel Balls

Opt for specially designed gel blasters. Inferior or inconsistent gel balls can cause irregularities in firing, leading to increased noise and reduced performance. 

Pro Tip

Choose gel balls that are well-sized, properly hydrated, and of a reputable brand for optimal performance and reduced noise.

Properly Lubricate The Gearbox

Ensure that the gearbox is adequately lubricated with a suitable gel blaster lubricant. Proper lubrication minimizes friction and helps the internal components work smoothly, reducing noise. 

Follow the manufacturer’s lubrication frequency and quantity recommendations to maintain optimal performance.

Maintain Cleanliness

Regularly clean the barrel, hop-up unit, and internal components of the blaster. Accumulated dirt, debris, or gel residue can affect performance and increase noise levels. 

Use a cleaning rod, cotton swabs, and mild cleaning solutions to remove any buildup and ensure smooth operation.

Also Read: What Factors Can Help To Enhance The Performance Of Glock 18 Gel Blasters?

Check For Air Leaks

Air leaks can negatively impact the blaster’s performance and generate additional noise. Inspect the seals, o-rings, and other air-tight components for any signs of wear or damage. 

Replace worn-out or damaged seals to maintain proper air compression and minimize noise from escaping air.

Consider A Silencer Attachment

Some gel ball blasters have suppressor or silencer attachments available. These accessories can help reduce the noise generated during firing. Ensure the attachment is compatible with your blaster and complies with local laws and regulations.

Seek Professional Modifications

If you seek significant performance enhancements and noise reduction, consider consulting a professional gel blaster technician. They can offer specialized modifications tailored to your blaster’s specific model and performance goals.

Frequently Asked Question

Question 1: Why do some electric gel ball blasters make more noise than others?

Answer: Different electric gel ball blasters can vary in noise levels due to several factors. These include the quality of internal components, gear ratios, motor types, and overall design. Higher-quality blasters often incorporate features that reduce noise and vibrations, resulting in a quieter operation.

Question 2: Is my gel ball blaster making sound normal?

Answer: It is normal for electric gel ball blasters to produce sounds during operation. As mentioned earlier, various components’ intricate movements and interactions can generate mechanical noises. As long as the blaster functions properly and the sounds are not excessively loud or accompanied by other issues, there is usually no cause for concern.

Question 3: Can I reduce the noise of my electric gel ball blaster?

Answer: Yes, there are several steps you can take to reduce the noise produced by your electric gel ball blaster. Firstly, ensure that all screws and components are tightly secured to minimize vibrations. Additionally, high-quality lubricants designed for gel ball blasters can help reduce friction and dampen sound. Upgrading internal components, such as the gears and piston, to higher-quality options can also contribute to a quieter operation.

Question 4: Are there any risks associated with the sounds my gel ball blaster makes?

Answer: In most cases, the sounds produced by electric gel ball blasters do not indicate any inherent risks. However, it is essential to regularly inspect your blaster for any signs of damage or wear. Unusual sounds accompanied by performance issues, such as reduced range or accuracy, may indicate a problem that requires attention. In such cases, it is recommended to consult with an experienced gel ball blaster technician or contact the manufacturer for further assistance.

Question 5: Can I modify my electric gel ball blaster to make it quieter?

Answer: Modifying your electric gel ball blaster can be a solution for reducing noise levels. However, it’s important to note that modifications may void warranties and affect the blaster’s performance or safety. If you decide to make modifications, it’s crucial to research and follows reputable guides or seek professional assistance to ensure the modifications are done correctly and safely.

Question 6: Are there any external factors that can contribute to the noise?

Answer: Yes, external factors can impact the perceived noise levels of an electric gel ball blaster. For example, playing in an enclosed area with hard surfaces can amplify the sound due to reverberation. On the other hand, playing outdoors or in larger spaces can help dissipate the noise. Adding a suppressor or a suitable muzzle device can also help reduce the noise generated by the blaster.

Final Words

The sounds produced by these blasters may initially raise concerns. They are typically a result of the mechanical nature of the device. 

By understanding the reasons behind these sounds and taking appropriate measures, such as securing components, using lubricants, and upgrading parts, you can minimize the noise and enjoy a more satisfying gel ball blaster experience.

Occasional sounds from your electric gel ball blaster are part of its normal operation. However, if you notice any unusual or persistent issues with your blaster, it is always recommended to seek professional assistance or contact the manufacturer for guidance.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *