What happens if you soak gel balls for too long

When it comes to gel-blaster balls, it is mandatory to soak them for a limited time, so people who use them often wonder What happens if you soak gel balls for too long? Prolonged soaking can result in deformations, loss of performance, and safety concerns.

Gel blaster balls are made from a polymer, most commonly sodium polyacrylate. These polymer beads can absorb large quantities of water, resulting in their expansion. And soaking them properly is considered crucial for optimal performance.

In this article, we will explore the effects of prolonged soaking, the recommended soaking time, and offer tips for maintaining gel blaster balls.

Signs That Gel Balls Have Been Soaked Too Long

When gel blaster balls are soaked for an extended period, several signs can indicate that they have been overcharged for too long. Here are some signs that can suggest excessive soaking.

Excessive swelling

If the gel blaster balls have absorbed too much water, they may exhibit excessive swelling. They will appear larger than usual and may feel mushy or soft to the touch. 

Overhydration can lead to a loss of structural integrity, making the balls more prone to breakage.


Gel blaster balls that have been soaked for an extended period may become fragile. They can easily break apart, crumble upon impact, or even when handled gently. 

The excessive water absorption weakens their structure, compromising their durability and overall performance.

Sticky texture

What happens if you soak gel balls for too long? Gel balls soaked for too long may develop a sticky or tacky texture. This stickiness can result from the gel balls breaking down or forming a slimy residue due to prolonged exposure to water. 

The sticky texture can affect their ability to feed properly through the gel blaster and may result in jams or misfires.

Reduced elasticity

Excessive soaking can cause the gel blaster balls to lose their elasticity. Usually, gel balls are elastic, allowing them to bounce and travel at high speeds when fired from a blaster. 

pro tip

If gel blaster ball soaked for too long, they may become less resilient and lose their ability to bounce effectively. This can result in reduced shooting accuracy and range.

Inconsistent performance

Gel blaster balls that have been soaked for an extended period may exhibit inconsistent performance when used in a gel blaster. They may not fly straight or maintain their intended trajectory, decreasing accuracy. 

Overhydrated or degraded gel balls may break more readily upon impact, compromising their gameplay performance.

Also Read: Do You Put Gel Balls In The Fridge?

Effects Of Soaking Gel blaster Balls For Too Long

If gel-blaster balls are soaked for too long, they can experience several effects. Gel-blaster balls, also known as water beads or gel balls, are typically used in gel blasters or water guns for recreational purposes. 


Overhydration is one of the primary effects of soaking gel-blaster balls for too long. These gel balls are designed to absorb water and expand in size. However, excessive soaking can cause them to become oversaturated and excessively swollen. 

This overhydration compromises their structural integrity, making them mushy or fragile. As a result, the gel balls are more likely to break apart, reducing their overall performance and effectiveness during gameplay.


Prolonged soaking can lead to the degradation of gel-blaster balls. Extended exposure to water, mainly if it contains impurities or chemicals, can cause the gel balls’ material to deteriorate. 

What happens if you soak gel balls for too long, This degradation weakens the beads, making them less durable and more prone to breakage. 

Moreover, the chemical composition of the water or any contaminants present in it can interact with the gel balls, potentially altering their properties and negatively impacting their performance.

Reduced Elasticity

Another consequence of soaking gel-blaster balls for too long is the reduction in their elasticity. Gel balls are designed to be elastic, allowing them to bounce and travel at high speeds when fired from a blaster. 

However, excessive soaking can make them softer and cause them to lose their elasticity. 

The excessive water absorption makes the gel balls less resilient, diminishing their ability to bounce effectively and travel long distances. Consequently, their accuracy and shooting performance can be significantly compromised.

Accuracy and Performance Issues

Soaking gel-blaster balls for an extended period can result in accuracy and overall performance issues. When fired from a blaster, overhydrated or degraded gel balls may not fly straight or maintain their intended trajectory. 

The consistency and structural integrity changes can lead to shooting accuracy and range inconsistencies. The gel balls may also break more readily upon impact, reducing accuracy and effectiveness during gameplay.

You May Also Like: What To Do With Orbeez?

The Risks of Over Soaking Gel Blaster Balls

While soaking gel blaster balls are necessary to achieve their desired size and consistency, leaving them submerged for an excessive amount of time can lead to certain risks and adverse effects. 

To make sure the gel balls and blasters work fine and last as long as possible, it’s essential to find a good mix and not soak them too much.

Bursting or Fragmentation

Over-soaking gel blaster balls can cause them to become overly soft and fragile. When gel balls are left soaking for an extended duration, they can reach a point where their outer layers break down, leading to bursting or fragmentation upon firing. 

This is quite challenging. To get things right, decrease shooting distance and potentially damage the internals of the gel blaster.

To maintain the structural integrity of gel blaster balls, it is recommended to follow the manufacturer’s guidelines regarding the soaking time. Typically, soaking for several hours or overnight is sufficient to achieve the desired consistency without risking excessive softening.

Expansion is size

Gel blaster balls are designed to absorb a specific amount of water, reaching an optimal size for gel blasters. Oversoaking can cause excessive water absorption, leading to swelling and expansion beyond the intended size. 

This can affect the feeding mechanism of the blaster and may cause jams or feeding issues during gameplay.

To avoid such complications, monitoring the soaking process and removing the gel balls from the water once they have reached the recommended size is advisable. 

It is considered very important to remember that different brands and gel balls may have varying soaking times. Hence, referring to the manufacturer’s instructions is essential for achieving optimal results.

Recommended soaking time for gel balls

The recommended soaking time for gel balls, also known as gel blaster balls or water beads, may change depending on the specific brand and type of gel balls. However, a standard guideline for most gel balls is to keep them in water for approximately 3 to 4 hours

This duration allows the gel balls to fully hydrate and expand to their intended size for optimal performance. It’s important to remember that the best-recommended way to get the perfect and desired results is to do what the manufacturer recommends. 

Some brands may provide specific recommendations for soaking times, so it is advisable to consult the packaging or product information supplied by the manufacturer.

During the soaking process, it is recommended to use clean, room-temperature water. Avoid using hot water, as it can potentially damage the gel balls or cause them to overhydrate. 

Additionally, excessive amounts of water beyond what is necessary for hydration can lead to overhydration and negatively impact the gel balls’ performance.

Suppose you are still determining the recommended soaking time for a specific brand or type of gel balls. In that case, the perfect way to get the correct information is to talk to the manufacturer or look at their official website.  

Following the recommended soaking time ensures the gel balls achieve the desired consistency, elasticity, and performance when used in gel blasters or water guns.

pro tip

Remember that proper hydration is essential for gel balls to function effectively, but more than the recommended soaking time can lead to overhydration and potential issues.

Best Practices for Soaking Gel Balls to prevent over soaking

To prevent the over-soaking of gel balls and ensure their optimal performance, here are some best practices to follow when soaking them.

Follow the manufacturer’s instructions

Always refer to the manufacturer’s guidelines or instructions for the gel balls. Different brands or types of gel balls may have specific recommendations for soaking times and methods. Adhering to these instructions is essential for achieving the best results.

Use a timer

Keep track of how long something is soaking by using a timer. This helps prevent accidentally exceeding the recommended soaking duration, leading to overhydration and negative effects on the gel balls’ performance. 

Set the timer according to the manufacturer’s recommended soaking time.

Use clean, room-temperature water

Fill a container with clean water at room temperature. Avoid hot water, which can cause the gel balls to overhydrate or deform. Using cold water may slow down the hydration process. 

Room temperature water is ideal for achieving the desired hydration level without compromising the gel balls’ integrity.

Appropriate water-to-gel ball ratio

Using the correct amount of water when soaking the gel balls is essential. Too much water can lead to excessive hydration, while too little water may result in underhydrated gel balls. 

Follow the manufacturer’s advice about how much water to add to each gel ball to ensure you get enough water.

Observe the gel balls during soaking

While the timer is running, periodically check on the gel balls as they soak. Look for signs of proper hydration, such as the balls expanding to their intended size. If you notice excessive swelling or a mushy texture, it may indicate that the gel balls have been soaking for too long. 

In such cases, remove them from the water promptly.

Drain excess water

Drain the excess water from the container once the recommended soaking time has elapsed. You can separate the gel balls from the water with a sieve or colander. Avoid squeezing or pressing the gel balls excessively, as this can cause damage or deform them.

Rinse and store properly

After draining the water, rinse the gel balls gently with clean water to remove any remaining residue. 

Then, transfer them to a suitable storage container or bag. Ensure the container is airtight to prevent the gel balls from drying out or absorbing moisture from the environment.

Must Read: What Happens If You Leave Orbeez In Water Too Long?

Frequently Asked Questions about What happens if you soak gel balls for too long

Question 1: Can I reuse gel blaster balls after soaking them for too long?

Answer: It is generally recommended to prioritize using fresh gel blaster balls rather than reusing ones that have been soaked for extended periods. Reused balls may have compromised integrity and performance.

Question 2: How long should I soak gel blaster balls before use?

Answer: The recommended soaking time for gel blaster balls is typically three to four hours. However, following the manufacturer’s instructions for optimal performance is advisable.

Question 3: Can I soak gel blaster balls in warm water?

Answer: Yes, you can soak gel blaster balls in warm water. Warm water can help accelerate the hydration process, but avoid using hot water as it may damage the gel blaster balls.

Question 4: Can I store gel blaster balls after soaking them?

Answer: It is recommended to drain the excess water and gently rinse the gel blaster balls after soaking. Please keep them in a cool-dry place to keep them in good shape and stop them from drying out or getting too wet.

Question 5: What should be done if my gel blaster balls are deformed?

Answer: If gel blaster balls become deformed or distorted, you can attempt to rehydrate them by soaking them again. However, reduce the soaking duration to avoid further deformation.

Final Words

Soaking gel blaster balls is a crucial step in preparing them for use in gel blasters. Although, it is vital to be careful and avoid over soaking, as it can lead to bursting, fragmentation, swelling, and reduced performance. 

Overhydrated gel balls become mushy and prone to breaking, while prolonged exposure to water can cause degradation and make them less durable. Additionally, they may lose their elasticity, become fragile, and develop a sticky texture. 

To ensure the best experience with gel blaster balls, knowing about signs, effects, and how to prevent oversoaking guidelines is essential. By doing so, you can maintain their integrity and optimize their performance during gameplay.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *